Wired connection to wireless ethernet bridge – Motorola WE800G User Manual
Page 25
Advertising
SECTION 2
INSTALLATION
2-8 SECTION
2,
INSTALLATION
Wired Connection to Wireless Ethernet Bridge
This section applies if you are connecting your PC with an Ethernet
cable to the Wireless Ethernet Bridge. Your PC must be installed first
with an Ethernet adapter.
You need the supplied Ethernet cable to connect the PC to the Wireless Ethernet
Bridge.
1 Using the supplied Ethernet cable, connect one end of the cable
to your PC’s Ethernet adapter and the other end to the LAN port
on the Wireless Ethernet Bridge:
LAN
Antenna
Reset
Power
You are now able to configure the Wireless Ethernet Bridge.
2 To configure the Wireless Ethernet Bridge, please refer to
Section 3:Configuration.
Advertising