Motorola WE800G - Manual (Page 40)

CONFIGURATION SECTION 3
SECTION 3, CONFIGURATION 3-3
Active Profile and Site Monitor
These screens enable you to configure your Wireless Ethernet
Bridge for different wireless scenarios and to search for Access
Points (APs).
! Active Profile
! Site Monitor
Site Survey – Active Profile
This is the first screen that appears when logging into the web-based
utility. It enables you to select the Profile you want to use. A Profile
enables you to configure your unit for different wireless networks.
For example, if you need to switch between a home network and a
friend’s network, you can configure a Profile for each network. Or, if
you need to setup a temporary wireless network at a tradeshow, then
the extra Profile enables you to maintain your primary settings.
Click APPLY to save your settings or CANCEL to cancel changes.
Field or Button Description
Active Profile
Selection Select the Profile you want to enable. The Profile
selected here activates the settings of Wireless
Profile 1 or 2.
Mode Enables you to select the type of transmission
protocol your wireless network uses.
The default is Auto.
The options are:
! Auto (802.11b and 802.11g)
! G Only (802.11g only)
! B Only (802.11b only)