Motorola WE800G - Manual (Page 29)

SECTION 2 INSTALLATION
2-12 SECTION 2, INSTALLATION
Windows 98 and ME DHCP Server Configuration
After your initial configuration has been completed, you may need to
setup your PC for using a DHCP server, using the procedure below.
1 Follow Steps 1 through 6 from above.
Windows 98SE Windows ME
2 Select Obtain an IP address automatically.
3 Click OK and then complete the procedure by following steps 10
through 12.
Configuring Windows 2000
1 Click Start.
2 Select Settings.
3 Select Control Panel.
4 Double-click Network and Dial-Up Connections.