Matsushita CF-Y5LWVYZ 1 2 - Manual (Page 61)

61
9.3.4.15. Assembly of the SW PCB FFC
Pet Tape
(FFC standard)
The tape externals
are centers of the
FFC reinforcement
board.
The bend habit is put on FFC
PET Tape affixation
PET Tape affixation
Electrode side
FFC insertion standard
(going out =1 of electrodes)
Sheet edge side
Sheet edge side Cabinet
difference line
When the part is bent this, the thing
which is placed by the finger, held to
Board who bends, and not bent
When the lock lever is released, slowly
operates in parallel because the lock
lever of the socket is damaged easily
Outside diameter of
machine screw
SW PCB FCC insertion
3st
bend
2st
bend
1st
bend
4st
bend
<SW FFC bend position>
2nd
bend
1st bend
3st bend
3st bend
Safety work
Safety work