Matsushita CF-Y5LWVYZ 1 2 - Manual (Page 67)

67
9.3.6. Assembly knowhow of the Body
9.3.6.1. Keyboard preparation
9.3.6.2. Installation of Main Board
Affixes between
square holes
Affixes between
square holes
both sides tape
both sides tape
Boss central standard
0 1mm
From a square hole extemals
0-2mm
KBD Tape
Keyboard
Square hole extemals standard
0 1mm
Affixes between
square holes
MAIN PWB A'SSY
DIMM COVER
FIG1
It is confirmed that W-LAN SW
is turning off(Left) before building
in of BOTTOM CASE.
(OFF:Left ON:Right)
Main PWB A'ssy
is installed
Attention when Main
Pwb A'ssy is installed
FIG 1
BOTTOM CAB A'SSY:
Attention of using properly
The ANT PWB connection
cable passes the FCC under
There is BT and for the model
The flaking off paper of the cushion is
peeled off, installs in the cabinet in the
under, and affixes .
FIG1
Attention of using properly
MK1=Only Dimm Cover
Excluding MK1=
There is heat radiation part affixation
Attention of using properly of BOTTOM CAB A'SSY
(Confirms by the hinge fixation boss in the cabi in the under)
YA-0=It is penetration and a hole of about 2.0.