Motorola RDU2080d - Manual (Page 46)

PROG
RAM
M
ING
FEATUR
ES
English
44
PROGRAMMING RX (RECEPTION) CODES
(CTCSS/DPL)
Once you have chosen the channel you want to
program, short press the PTT button or MENU
to scroll through the options until you reach the
‘Code Programming Mode’.
The radio display will show the blinking
CTCSS/DPL code as follows:
To program the desired code, scroll up/down
with the
/ buttons until you get the
CTCSS/DPL code value you want to set up.
Long press the PTT button to exit and save.
PROGRAMMING RX (RECEPTION)
BANDWIDTH
Some frequencies have selectable channel
spacing, which must match other radios for
optimum audio quality.
Once you have chosen the channel you want to
program, short press the PTT button or MENU
to scroll through the options until you reach the
‘Bandwidth Programming Mode’. The radio
display will show the current bandwidth setting
as follows:
R
X
BW R
X