Motorola RDU2080d - Manual (Page 62)

PROG
RAM
M
ING
FEATUR
ES
English
60
Cloning Radios using the CPS (Computer
Programming Software)
To clone RDX™ radios using the CPS
software, you will need to have available the
CPS, a Drop-in Charger Tray and the CPS
Programming Cable. Information on how to
clone using the CPS is available either in
• the CPS Help File --> Content and Index -->
Cloning Radios or
• in the CPS Programming Cable Accessory
Leaflet.
To order the CPS programming cable, please
refer to P/N RKN4155. For details about
accessories refer to the Accessories Section.
Repeater Capabilities
Programming Repeater Capability
You can only program Repeater Frequencies if
your radio has been previously configured via
the CPS. The repeater icon
will appear
solid, and the MENU options for programming
TX frequencies, TX CTCSS/DPL codes and TX
Bandwidth will be available. If the repeater
feature is mapped (using CPS) to one of the
radio buttons, then the repeater icon will blink.
This indicates that you can use the repeater
‘button’ to toggle ON/OFF repeater. If repeater
is not enabled in the radio this icon will not be
displayed.
Once you have selected the channel you want
to set up for repeater operation, you can move
between the Programming options by short
pressing the PTT or MENU button to program
the frequency, code and bandwidth for the
repeater channel.