Motorola RDU2080d - Manual (Page 63)

PROG
RAMM
ING
FEAT
URES
English
61
To program the Frequency TX, scroll through
the radio options until your display shows:
To program the desired frequency, scroll using
the
/ buttons until you get the desired
frequency code value. Long press the PTT
button to exit and save or short press the PTT
button to go to the next programming feature
without saving.
Note: If your radio displays the (Power
Select) icon refer to note in ‘Programming
RX (Reception) Bandwidth’ section for
further explanation.
To program the CTCSS/DPL code, scroll
through the programming options by short
pressing the PTT button until your radio display
shows:
To program the desired code, scroll using /
buttons until you get the desired CTCSS/
DPL code value. Long press the PTT button to
exit and save or short press the PTT button to
go to the next programming feature without
saving.
T
X
T
X