Motorola RDU2080d - Manual (Page 49)

PROG
RAMM
ING
FEAT
URES
English
47
radio will sound the call tone selected (except
for setting ‘0’). Once you have selected the
tone you want to program, long press the PTT
button to exit and save or short press the PTT
button to move to the next programming
feature without saving
Note: The values available for Call Tones are
dependent upon the values programmed via
the CPS. When the call tone setting is ‘0’ it
means it is disabled.
PROGRAMMING MICROPHONE GAIN
LEVEL
To configure the microphone gain level, enter
’Programming Mode’ and scroll through the
programming options by short pressing the
PTT button. When you reach the ‘Microphone
Gain Level Programming Mode’ the display will
read as follows:
The current microphone gain level setting will
blink. You can select the desired microphone
gain level by pressing the
/ buttons
(1=low gain,2= Medium gain or 3= high gain).
Once you have selected the gain level you
want to program, long press the PTT button to
exit and save or short press the PTT button to
move to the next programming feature without
saving.
Note: The values available for microphone gain
level are dependent upon maximum levels
the radio supports.
IMIC