Motorola RDU2080d - Manual (Page 56)

PROG
RAM
M
ING
FEATUR
ES
English
54
Bandwidth Select
Default setting for Bandwidth Select depends
on the specific frequency and channel. For
details refer to ‘Frequencies and Codes Charts’
Section.Some frequencies have selectable
channel spacing, which must match other
radios for optimum audio quality.
Time-Out Timer
When PTT button is pressed, transmissions
can be terminated by setting up a 'time-out’
timer.
Power Select
Power Select allows you to select the radio
between high and low transmission power per
frequency in each channel. The power levels
for RDX™ series 2W toggle between 1W and
2W or 2W and 4W/5W depending on the radio
model .
Note: Some frequencies may have FCC transmit
power restrictions that don't allow them to
be set at a higher power level. For details
see the Frequencies and Code Chart
Section.
Battery Type Setting
The RDX™ series radio can be powered by
either Alkaline, Lithium-Ion cells or battery
pack. The battery pack can be detected at
power-up and the corresponding battery level
will be shown on the radio's display.