MGE UPS Systems 66102 User Manual
Page 27
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual
34003991EN/GA
- 27 -
Z
Recipient List: On the left side of this page, up to four recipients can be configured to receive e-mails from the card. Each addressee
has its own trigger events, selected from the right side of the page, for which an e-mail is sent. The card’s log indicates e-mail
transmission errors
Each recipient is configured with the following parameters
Z
Recipient: (Field is limited to 49 characters) this is the e-mail address of the person or department to receive the e-mail.
The default value is
Z
Attached files: The files selected (Measurements, Event log, System log, Environment measurements) are enclosed with each e-
mail sent. The files are sent in CSV format
Z
Periodic report: In addition to the e-mails sent when events occur, a periodic e-mail containing the 3 log files can be sent to the
recipient every x days at the time specified by the user.
To configure the first transmission, specify the day, time and frequency of the next transmission in the "next report" box. After this
date, the page will show the date and time of the next transmission.
Data are sent in CSV format.
Z
Save: Saves any modifications.
Z
Test enables an e-mail to be sent to the recipient immediately. This is one way of checking e-mail transmission, particularly access to the
SMTP server configured in "Network" settings. A transmission report is added to the system log.
The event label in the subject and text of the message is replaced with a test label.
If the user makes any modifications to the page, they must be saved before using the "Test" function.
Z
Notified events:
The right side of the page shows the events that can be notified.
By default, only the main events of battery operation and a few UPS alarms are accessible. All the events appear if the Show/Hide
Events option is actuated.
By default, two events are selected for notification. The user can modify this pre-selection by ticking other events or can, on the contrary,
restore the initial configuration by clicking Set Default.
Z
Email Message Settings: access to the message configuration page
Z
Network Settings: enables the name of the SMTP server to be entered.
Z
Export settings to file: Enables exportation ("Download" button) and saving of card parameterisation information.
Z
Import settings from file: Enables selection of configuration file ("Browse" button) and uploading ("Upload" button) of card
configuration information.
Z
Security: The administrator has to click on Save and enter his/her login/password to save any modifications. The default login
and password are: MGEUPS