Configuration via rs232, Choice 1: restart / reset, Choice 2: network configuration – MGE UPS Systems 66102 User Manual
Page 51: Hoice, Estart, Eset, Etwork, Onfiguration, Startup and shutdown sequences, 6 configuration via rs232
T H E U N I N T E R R U P T I B L E P O W E R P R O V I D E R
Network Management Card – User Manual
34003991EN/GA
- 51 -
6 Configuration via RS232
Z
Use the cord supplied with the card.
Z
Connect the card to a computer equipped with a hyperterminal type emulator. The serial link must be set at 9600 baud, 8 bits, no parity,
1 stop bit, and without flow control.
Z
Check that UPS power is on.
Z
Enter the MGEUPS or mgeups password (non modifiable).
Z
The menu is in English only.
-----------------------------------------------------------------------------
MGE UPS SYSTEMS
NETWORK MANAGEMENT CARD
-----------------------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
5 : Exit
6.1 Choice 1: Restart / Reset
Use this function to restart the card; two choices are possible
1 : Hardware Reset: Equivalent to a restart of the electrical power supply.
2 : Restart application: Restarts only the application part.
6.2 Choice 2: Network Configuration
Use this function to access network settings.