Operations – MGE UPS Systems Switched PDU User Manual
Page 27
3. Operations
Displaying accessible serial ports
The List Ports command displays accessible serial ports for the current user.
To display accessible serial ports:
At the Switched PDU: prompt, type
list ports
and press
Enter
.
Example
The follow command displays all accessible serial ports for the current user:
Switched PDU: list ports<Enter>
Port Port
ID Name
Console Console
Displaying infeed status
The Istat or Iload command displays the status of one or more infeed.
This display includes the infeed absolute and descriptive names and the Input Status and current Load reported
to the Switched PDU by the infeed.
To display status of one or more infeeds:
Type
istat
and press
Enter
, or
Type
iload
and press
Enter
.
Examples
The following command displays the infeed status:
Switched PDU: istat
Input Input Input Input
Feed ID Feed Name Status Load
.AA HQ_1_Infeed_A On 10.5 Amps
Connecting to a serial device
The Connect command allows pass through serial connection to devices attached to the standard serial port
(Console).
To connect to a serial device:
At the Switched PDU: prompt, type
connect
console
and press
Enter
.
To disconnect from a serial device:
Type
!*break
and press
Enter
.
301-0399-4 Rev A. - Page 27