MGE UPS Systems Switched PDU - Manual (Page 55)

4. Advanced Operations
Displaying trap configuration information
The Show Traps command displays information about all traps.
To display trap information:
At the Switched PDU: prompt, type show traps and press Enter .
Example
The following command requests trap configuration information:
Switched PDU: show traps <Enter>
Tower trap configuration:
Tower Tower Status
ID Name Trap
.A Florida_HQ_1 ON
.B Florida_HQ_2 ON
More (Y/es N/o): y
Input feed trap configuration:
Input Input Status Load High
Feed ID Feed Name Trap Trap Thresh
.AA HQ_1_Infeed_A ON ON 255 A
.BA HQ_2_Infeed_A ON ON 255 A
More (Y/es N/o): y
Outlet trap configuration:
Outlet Outlet Change Status
ID Name Trap Trap
.AA1 DataServer_1 OFF ON
.AA2 WebServer_1 OFF ON
.AA3 FileServer_1 OFF ON
.AA4 OFF ON
.AA5 OFF ON
.AA6 OFF ON
.AA7 OFF ON
.AA8 OFF ON
.AB1 OFF ON
.AB2 OFF ON
.AB3 OFF ON
.AB4 OFF ON
.AB5 OFF ON
.AB6 OFF ON
.AB7 OFF ON
.AB8 OFF ON
More (Y/es N/o): y
Environmental Monitor .A trap configuration:
Name: Florida_HQ_1
Status Trap: ON
Temperature/Humidity Sensor .A1 Temperature/Humidity Sensor .A2
Name: Temp_Humid_Sensor_A1 Name: T/H2_Florida_HQ_1
Status Trap: ON Status Trap: ON
Temp Trap: ON Temp Trap: ON
Low: 0 Deg.C Low: 0 Deg.C
High: 127 Deg.C High: 95 Deg.C
Humid Trap: ON Humid Trap: ON
Low: 5 % RH Low: 0 % RH
High: 100 % RH High: 100 % RH
301-0399-4 Rev A. - Page 55