Macsense Connectivity MPC-200 - Manual (Page 38)

This utility will enumerate all the PCI-to-CardBus bridges and configure CardBus
devices that it finds in the target system.
Usage:
C:\> STARTER [optional switches]
where [optional switches] are:
-h (display this help text)
-io IO_ADDRESS (set 16-bit IO mapping address (ie E000)
-pi (use PCI interrupt)
-il INTERRUPT_NO (choose interrupt line)
-v12 (choose VPP1=VPP2=12V )
-v5 (choose VPP1=VPP2=5V )
-v3 (choose VPP1=VPP2=3V )
Example:
This example shows the STARTER command with some switches. It has mapped
devices behind any PCI-to-CardBus bridges.
Notice that the 1 device have been mapped in I/O space.
The CardBus bridge will use PCI interrupt 10 (0A hex) in this example.
C:\>STARTER -pi -il 0A
+----------------------------------------------------------------------------------------+
| CardBus STARTER V1.0, Copyright (c) 1998 Foresson Corporation |
+--------------------- ----------------------------------------------------------------+
Build Date: Sep 25 1998, PCI Config Mechanism: #1, BIOS version: 2.16
For help use: STARTER -h
Ethernet, [2,0], bridge:[2,0], 128 bytes IO, base: D000h
Com port, [2,0], bridge:[2,0], 8 bytes IO, base: D400h
Ethernet, [2,0], bridge:[2,0], 1024 bytes Memory, base: D1000h
Com port, [2,0], bridge:[2,0], 1024 bytes Memory, base: D1400h
found 7 PCI devices
mapped 1 PCI devices
PCI to CardBus Bridge Utilities
39