Macsense Connectivity MPC-200 - Manual (Page 40)

line is routed to your CardBus bridge and run the STARTER.EXE with interrupt line
override (STARTER -pi -il NN). If your PCI BIOS is rev 2.1, use ADJIRQ.EXE to route your
selected IRQ to the CardBus bridge.
Developing device drivers and diagnostics for a Digital's CardBus device that is down-
stream of a PCI-to-CardBus bridge (PCB) should be transparent. Once the PCB is config-
ured and the Digital's CardBus device is mapped into I/O or memory space, the driver
should function without knowing that there is a PCI-to-CardBus bridge between it and the
CardBus device that it is driving.
PCI to CardBus bridges Supported
¥ Texas Instruments' TI1130
¥ Toshiba
¥ Cirrus Logic's 6832
¥ Ricoh
¥ DataBook
PCI to CardBus Bridge Utilities
41