Macsense Connectivity MPC-200 - Manual (Page 41)

Appendix C Specifications
¥ Network standard: 10Mbps IEEE 802.3 10BASE-T Ethernet
100Mbps IEEE 802.3u 100BASE-TX Fast Ethernet
¥ Type II PCMCIA, Hot Plug-and-Play Fast Ethernet CardBus Card, supports Full
Duplex 10BASE-T and 100BASE-TX communication.
¥ Complies with 32-bit PCI Card Bus specification.
¥ For Windows 3.x and Windows 95, Windows 98, and Windows NT operation sys-
tem.
¥ Support Network and Communication Device Class OnNow requirements for
Microsoft PC97 and PC98 specification, including all wake-up events.
¥ Pattern matching with VLAN support.
¥ Link change.
¥ Magic Packet with SecureON.
¥ Supports RJ-45 (STP-1/UTP-3,4,5) media connectivity.
¥ Compliant with Advanced Configuration and Power Interface (ACPI) and PCI bus
Power Management Interface Specification D0, D1, D2 and D3/hot.
¥ Support the legacy modes including sleep, snooze, normal and CLKRUN.
¥ Contain on chip PCS and scrambler/de-scrambler for 100BASE-TX.
¥ Fully compliant with ANSI 8802-3 and 10BASE-T.
¥ Support IEEE 802.3 auto-negotiation algorithm of full-duplex and half-duplex opera-
tion for 10Mbps and 100Mbps (NWAY).
¥ Automatically negotiates 10Mbps or 100Mbps connection speed.
¥ Integrated large transmit and receive FIFOs provide packet buffering for longer
latency.
¥ Integrated an on chip DMA with programmable burst size, providing low CPU uti-
lization.
¥ Support drivers of ODI, NDIS to support NetWare, LAN Manager, Windows 95,
Windows 98, Windows NT.
¥ Provide 3.3 volt Lower power CMOS design devices design.
¥ LEDs for diagnostics and monitoring use.
Specifications
43