Miele H4200 - Manual (Page 20)

Temperature selector
The temperature can be freely selected
within the given range.
The temperature selector must only
be turned in a clockwise direction as
far as it will go and then back again.
Do not attempt to turn it the wrong
way, or all the way round, as this
would damage the selector.
The temperature indicator light y will
come on as soon as a temperature is
selected. It remains lit up whilst the oven
is heating up.
When the pre-selected temperature is
reached, the heating element switches
itself off. When the temperature falls
below that selected, the heating
element switches on again
automatically.
Using the oven
^ Place the food in the oven.
^ Turn the function selector to the
required function.
The oven interior light comes on.
^ Use the temperature selector to set
the required temperature.
The oven starts to heat up and the
cooling fan switches on.
^ Take the food out of the oven when it
is ready.
Turn the function selector and the
temperature selector back to the "0"
position.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit.
When the temperature in the oven has
fallen sufficiently, the cooling fan will
switch off automatically.
On models with a clock/timer, you can
set this procedure to finish
automatically, see the appropriate
section.
Using the oven
20