Installing the oven 63, Installing the oven – Miele H4200 User Manual
Page 63
Advertising
The appliance must not be operated
until it has been correctly installed in
its housing unit. Otherwise it poses
an electric shock hazard.
Important:
Do not fit insulation material inside
housing unit. This would hinder the
intake of air to the appliance.
Important:
Remove the protective cork spacers
from the sides of the oven before
installation.
Turn off the mains electricity supply
to the isolator.
^ Connect the mains cable to the
isolator.
^ Push the appliance into the oven
housing unit and align it.
^ Open the oven door and using two
screws secure it to the side walls of
the housing unit through the holes in
the oven trim.
^ Reconnect the power supply to the
isolator switch.
Installing the oven
63
Advertising
This manual is related to the following products: