Miele H4200 - Manual (Page 22)

Depending on model, your appliance
may be fitted with a clock timer.
The clock/timer can:
– display the time of day.
– be used as a minute minder,
– be used to switch the oven off
automatically at the end of a cooking
process.
Controls
l
k
l
The clock/timer is operated using
buttons Q, P and O together with the
display .
The Q button is used for selecting the
"Minute minder l" and "Cooking
duration l" functions.
To change the time of day shown in the
display press the P and O buttons at
the same time.
You can only enter a time for a
particular function if its symbol is shown
flashing in the display, e.g. "l", "l" or
"k".
The symbol will flash for about 7
seconds. If you fail to enter the time
during this 7 seconds you will have
to call the symbol up in the display
again.
Each press of the P or O button alters
the time in one minute increments.
Holding one of these buttons in will
speed up the process.
The time you set is automatically saved
to memory after about 7 seconds and
the symbol will stop flashing.
Pressing the Q button is another way of
saving your setting.
Setting the time of day
^ Press the P and O buttons at the
same time.
^ Whilst the "k" point is flashing in the
display, use the P or O buttons to
enter the time.
The clock has a 24 hour display.
The time then counts down in minutes
If there has been a power cut the time
of day has to be re-entered.
To change the sound of the
buzzer
There are 3 different tones.
^ Press the O button until the audible
tone is heard.
Each press of button O calls up a
different tone.
The last tone selected will automatically
be saved to memory after about 7
seconds.
If there has been a power cut the
audible tone will automatically revert to
the factory default setting, and will need
to be reset.
Clock/Timer
22