Catalytic enamel surfaces 44, Cleaning and care, Catalytic enamel surfaces – Miele H4200 User Manual

Page 44

Advertising
background image

Catalytic enamel surfaces

The

back panel

and the roof liner and

side liners (if fitted) are coated with
dark grey

catalytic enamel

. Soiling

from oil and fat is burnt off these
surfaces when very high temperatures
are used in the oven. The higher the
temperature, the more effective the
process.

The catalytic coating becomes
ineffective through using

abrasive cleaning agents,

hard brushes or abrasive
sponges,

oven sprays.

Remove the catalytic back panel
and any side and roof panels from
the oven before cleaning the
PerfectClean oven surfaces with
oven spray.

Note that deposits of

spices, syrups

and similar substances

are not

removed from the catalytic coating by
this process. These should be removed
by hand whilst still fresh, using a mild
solution of hot water and washing up
liquid applied with a soft sponge or
brush. Remove the panels from the
oven to do this.

Soiling caused by

oil and grease

splashes

are removed from catalytic

coated surfaces when the oven is
heated to a high temperature. To do
this:

^ Take all accessories out of the oven.

^ Wipe large deposits of soiling from

the oven interior and the inside of the
door before starting the cleaning
process to avoid them baking onto

PerfectClean surfaces and becoming
impossible to remove.

^ Select Fan plus Y.

^ Set the highest temperature setting.

Run the oven for approx. 1 hour. The
length of time will depend on the level
of soiling.

On models with a clock/timer, you can
set this procedure to finish
automatically; see the appropriate
section.

Any remaining soiling will gradually
disappear with each subsequent use of
the oven at high temperatures.

If the catalytic coated panels are
very heavily soiled with oil and
grease, a film will develop on the
oven surface during the cleaning
process which can be wiped off with
warm water and a little washing up
liquid once cool.

^ Finally, clean the PerfectClean

surfaces and the inside of the door.

Should the catalytic coating on the
back panel or the roof liner become
ineffective through improper use or
heavy soiling, a replacement can be
obtained from your Miele dealer or
the Miele Spare Parts dept.

Cleaning and care

44

Advertising
This manual is related to the following products: