Miele H4200 - Manual (Page 53)

. . . spots like rust appear on the
catalytic surfaces
When roasting on the rack, the
circulating air sometimes picks up
spices, which are then deposited on
the oven interior walls. These residues
are not removed by catalytic cleaning,
and should be removed while fresh with
a mild solution of hot water and
washing up liquid applied with a soft
brush.
. . . a noise can be heard after a
cooking process
This is not a fault.
The cooling fan continues to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or on
the oven housing unit. When the
temperature has fallen sufficiently, the
fan switches off automatically.
The temperature will fall faster with the
oven door open.
. . . cakes and biscuits are not cooked
properly after following the times
given in the chart
Check whether,
^ the correct temperature was set.
^ there has been a change to the
recipe. The addition of more liquid or
more eggs makes a moister mix
which would need longer to cook.
. . . cakes or biscuits are unevenly
browned
There will always be a slight
unevenness.
If browning is very uneven, check
when baking with Fan plus Y:
– whether the temperature was set too
high,
– whether the correct shelf level was
used.
when baking with Conventional A:
– the colour and material of the baking
tins being used. Light coloured,
shiny, or thin walled tins are less
suitable,
– whether the correct shelf level was
used.
. . . there has been a power cut and
"
0k00 " is flashing in the display?
All pre-set times have been lost
because of the power cut.
The buzzer will also have been reset to
the default tone.
^ Reset the time and the buzzer tone.
Problem solving guide
53