Mitel IP8830 - Manual (Page 11)

IP8830 Broadworks IP Phone
User Guide
6 Dec. ‘08
- Call Forward No Answer – redirects incoming calls that are not answered in the configured no
answer time.
- Call Forward Busy or No Answer – redirects incoming calls if the line is busy or not answered
after the no answer time expires.
- Call Forward All Calls – immediately redirects all incoming calls.
To set up Call Forward:
o Press the CallFwd softkey.
o Use the
Previous - Next
softkeys to select the desired Call Forward condition.
o Press the
OK
softkey.
o Input the destination where you want your calls sent.
o Press the
OK
softkey. The display shows “(x) Fwd to ext” indicating the forward condition and
destination for the calls.
(B) = Busy, (N) = No-answer, (BN) = Busy or No-answer, (U) = Unconditional
To disable Call Forward:
o Press the
CallFwd
softkey. The message “Fwd to xxxx” disappears from the LCD.
3.7. 3-Party Conference
The IP Phone has a 3-Party Conference feature that lets you converse with two other parties
simultaneously.
To set-up a conference:
o Place first call as normal.
o Press the
Conferen
softkey. The call status changes to hold and you receive dial tone.
o Dial the number you want to join the conference.
o When the party answers, press the
Join
softkey to establish the conference.
To end your conference and disconnect all parties:
o Hang up the handset.
To cancel a conference, for example the second party does not answer or is busy:
o Press the
EndCall
softkey.
3.8. Call Waiting
With Call Waiting configured, while you are in a call the IP Phone alerts you of an incoming call. The line
button flashes and you receive a beep tone over the active conversation to indicate the new call. In
addition, during the ring signal, the LCD displays the incoming caller id so you know who is calling before
you interrupt the current call.
To answer an incoming call while on a call:
o Press the
Answer
softkey. The active call changes to the hold state and the new call connects.