Mitel IP8830 - Manual (Page 14)

IP8830 Broadworks IP Phone
User Guide
9 Dec. ‘08
To answer a call for a covered extension:
o Lift the handset. You may press the speakerphone button or press the headset button.
o Press the flashing DSS/BLF Coverage button. You may press the DSS line button prior to lifting
the handset, which activates the speakerphone and answers the call.
The LED indications of the DSS line button are:
• Solid red
line in use remotely
• Fast blinking red
Call appearance ringing for covered line
• Slow blinking red
Remote call hold
3.16. Hotline/Warm-Line
With Hotline/Warm-Line operation configured, the IP Phone automatically calls the defined destination
when you take the handset off-hook or press the speaker button. The call initiates immediately, Hotline,
or after a delay of up to 10 seconds, Warm-Line. The later permits you the time to access another feature
or line as needed. Note that with Hotline configured, Speed dial, redial and other automated dialing
features will not operate.
Operation of this feature is automatic.