Mitel IP8830 - Manual (Page 24)

IP8830 Broadworks IP Phone
User Guide
19 Dec. ‘08
08:30
Date Format
*DD Mon (01 Jan)
Previous Next OK
08:30
Enter Password:
****
Å Clear OK
08:30
Lock Outgoing Call
Current value is ‘Yes’.
Yes No
- MM/DD (01/22)
- DD/MM (22/01)
- DD Month (22 Jan)
- Month DD (Jan 22)
- Disabled, no date display
To set the date display format:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous - Next softkeys and press the
OK
softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous - Next softkeys and press
the
OK
softkey.
o Dial 5, or move the cursor to
5.Date Format
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o Press the
Previous
-
Next
softkeys to select the display
format and press the OK softkey to save your entry. An
asterisk, », displays in front of the current setting.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to exit the configuration session.
5.7. Lock Outgoing Call
The IP Phone can be configured to allow outgoing calls only if a password is entered. When enabled, the
LCD screen will display the password request and the lock icon as shown, and the password must be
entered prior to placing an outgoing call.
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD
password.
To enable/disable the Lock Outgoing Call feature:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK softkey.
o Dial 8, or move cursor to
8.Lock Outgoing Call
using the
Previous
-
Next
softkeys and press the
OK softkey.
o Press the
Yes
softkey to enable Lock Outgoing Call, or
press the No softkey to disable Lock Outgoing Call.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.