Mitel IP8830 - Manual (Page 26)

IP8830 Broadworks IP Phone
User Guide
21 Dec. ‘08
08:30
Enter PIN Code
Å Clear OK
08:30
Paired Headset List
*Wireless Headset (00:1A:34:56:78:AB)
Add Next Delete
08:30
No Paired Headset
Search
08:30
Searched Headset List
Wireless Headset(00:1A:34:5678:AB)
Search Next Pair
5.10.1. Pairing a Bluetooth headset
A Bluetooth headset must be paired with the IP8830 Bluetooth module before it can be connected
(activated). Up to five (5) headsets may be paired with the IP Phone at one time. Note that only one may
be active at a time.
To pair and connect a new headset with the IP Phone:
o Press the Settings ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous - Next
softkeys, and press the
OK softkey.
o Dial 11, or move the cursor to
11.Bluetooth
using the
Previous - Next
softkeys, and press the
OK
softkey.
o Dial 1, or move the cursor to
1.Headset Management
using the
Previous - Next
softkeys, and press the
OK
softkey. This will display a list of paired headsets.
o If no headsets are paired with the IP Phone, press the
Search softkey, the IP Phone will search for nearby
Bluetooth headsets. If one or more Bluetooth headsets are
already paired with the IP Phone, press the right navigation
button and select the Add softkey to add another headset.
o Select a Bluetooth headset from the list of headsets using
the
Next
softkey, and select the Pair softkey.
o When the “Enter PIN Code” message displays, input the
PIN associated with the headset and press
OK
softkey. If a
valid PIN is entered, the headset is automatically activated
for use with your IP8830 phone.
o Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
5.10.2. Connect or Disconnect a Paired Headset
When one or more headsets are paired with the IP8830 phone, the headset must be connected
(activated) prior to use. When it is desired to change the active headset, the presently active headset
must be disconnected (deactivated) prior to connecting the new headset. The following procedure
describes the steps required to connect or disconnect a headset that is already paired to the IP Phone.
To connect a paired headset or disconnect an active headset:
o Press the Settings ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous - Next softkeys, and press the
OK
softkey.
o Dial 11, or move the cursor to 11.Bluetooth using the Previous - Next softkeys, and press the OK
softkey.