Mitel IP8830 - Manual (Page 21)

IP8830 Broadworks IP Phone
User Guide
16 Dec. ‘08
08:30
Headset Auto Mode
Current value is ‘No’.
Yes No
08:30
Press Flexible Button
08:30
[05] Select Function
*No Function
Previous Next OK
o Press the
Yes
softkey to enable the Headset Auto Mode or
press the No softkey to disable the Headset Auto Mode.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.
5.5. Setting Flexible Buttons
Your IP8830 Phone has twenty-four (24) flexible buttons. Normally, the first two (2) buttons are for your
line. The flexible buttons not assigned as line buttons can access various functions. The table below
indicates the available functions with a brief description of each.
Feature Description
0 No Function Unassigned
1 Speed Dial Function Dials the assigned number
2 Phone Book Function Views the personal phone book
3 Call Log Function Views the call log list
4 Mute Function Toggles the Mute feature on and off
5 Headset Function Toggles the Headset on and off
6 Redial Function Dials the last number dialed by the user.
7 Return Call Function Dials the number of the last answered call
8 Set Call Forwarding Sets the call forwarding configuration
9 Conference Function 1. Initiates a conference call
2. Joins calls in a conference
10 Transfer Function Initiates a call transfer
11 Hold Function Places an active call on hold
12 Do not disturb Toggles the DND on and off
13 Set Ringer Off Toggles the ringer on and off
14 Message Function Views the number of new and old messages stored
in the Voice Mail server, and dials the Voice Mail
server by pressing the
Dial softkey
To assign a function to a flexible button not used as a line:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK softkey.
o Dial 5, or move the cursor to
5.Flexible Key Setting
using
the Previous - Next softkeys and press the OK softkey.
o Select the desired flexible button. An asterisk, », displays
in front of the current setting.
o Select a function using the Previous - Next softkey and
press the
OK
softkey. Refer to the flexible button functions
chart above.