Mitel IP8830 - Manual (Page 23)

IP8830 Broadworks IP Phone
User Guide
18 Dec. ‘08
08:30
DST Auto Adjustment
Current value is ‘Yes’.
Yes No
08:30
Time Format
*24 HR (16:30)
Previous Next OK
08:30
Time Zone
*(GMT-08:00) PACIFIC STANDARD
Previous Next OK
o Dial 2, or move the cursor to
2.Time Zone
using the
Previous
-
Next
softkeys and press the
OK
softkey. An
asterisk, », displays in front of the current selection.
o Select the nearest region from the display using the
Previous
-
Next
softkeys and press the
OK
softkey to save the entry.
o Move to another parameter with the navigation buttons and continue the session or press the
Setting ( ) button to exit the configuration session.
5.6.3. DST Auto Adjustment
The IP8830 Phone automatically adjusts for DST (Daylight Savings Time) when enabled.
To enable/disable automatic daylight savings time:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous - Next softkeys and press
the
OK
softkey.
o Dial 3, or move the cursor to 3.DST Auto Adjustment using the Previous - Next softkeys and
press the
OK
softkey.
o Press the Yes softkey to enable DST Auto Adjustment, or
press the
No
softkey to disable DST Auto Adjustment.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to
exit the configuration session.
5.6.4. Time Format
The format of the LCD time display can be set for 12-hour format or 24-hour format. In addition, the LCD
time display can be disabled.
To set the display format for time:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous - Next softkeys and press the
OK
softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous - Next softkeys and press
the
OK
softkey.
o Dial 4, or move the cursor to
4.Time Format
using the
Previous
-
Next
softkeys and press the
OK
softkey.
o An asterisk, », displays in front of the current setting.
Press the Previous - Next softkeys to select the Time
Format and press the
OK
softkey to save your entry.
o Move to another parameter with the navigation buttons and
continue the session or press the Setting ( ) button to exit the configuration session.
5.6.5. Date Format
The format of the LCD date displays in the one of the formats below: