Mitel IP8830 - Manual (Page 27)

IP8830 Broadworks IP Phone
User Guide
22 Dec. ‘08
08:30
Paired Headset List
*Wireless Headset (00:1A:34:56:78:AB)
Add Next Delete
08:30
TI-IPP
00:1A:34:56:78:AB
08:30
Paired Headset List
*Wireless Headset (00:1A:34:56:78:AB)
Add Next Delete
08:30
Paired Headset List
*Wireless Headset (00:1A:14:78:34:1D)
Connect
08:30
Headset is connected
o Dial 1, or move the cursor to
1.Headset Management
using the Previous - Next softkeys, and press the OK
softkey. This displays a list of previously paired headsets.
o Select a Bluetooth headset from the list of paired headsets
using the
Next
softkeys. An asterisk, », displays in front of the current headset selection.
o Use the right navigation button to locate and select the
Connect softkey to activate the headset or press the
Disconn to deactivate the headset. The LCD will display
the connected or disconnected message for about 3
seconds.
o Move to another parameter with the navigation buttons and
continue the session or press the Settings ( ) button to
exit the configuration session.
5.10.3. Deleting a Headset from the Paired List
A Bluetooth headset can be removed from the Paired list. This is useful when five headsets are already
paired and a new headset must be paired with your IP8830.
To remove a headset from the Paired list:
o Press the Settings ( ) button.
o Dial 3, or move the cursor to
3.Phone Settings
using the
Previous - Next
softkeys, and press the
OK
softkey.
o Dial 11, or move the cursor to
11.Bluetooth
using the
Previous - Next
softkeys, and press the
OK
softkey.
o Dial 1, or move the cursor to 1.Headset Management using the Previous - Next softkeys, and
press the
OK
softkey. This will display a list of previously paired headsets.
o Select a Bluetooth headset from the list of headsets found
using the
Next
softkeys.
o Press the Delete softkey to remove the headset from the
Paired list
o Move to another parameter with the navigation buttons and continue the session or press the
Settings ( ) button to exit the configuration session.
5.10.4. Bluetooth Module Information
To assure the operation of the Bluetooth module, the address information for the module can be viewed
from the Bluetooth menu item.
To remove a headset from the Paired list:
o Press the Settings ( ) button.
o Dial 3, or move cursor to
3.Phone Settings
using the
Previous - Next
softkeys, and press the OK
softkey.
o Dial 11, or move cursor to
11.Bluetooth
using the
Previous - Next
softkeys, and press the
OK
softkey.
o Dial 2, or move cursor to
2.Local Device Info
using the
Previous - Next
softkeys, and press the
OK
softkey.
o Move to another parameter with the navigation buttons and