Web interface (continued), Window management, Key & image enhancement – Marshall electronic Network Control Box for IMD Monitors NCB-1004 User Manual
Page 17
17
Web Interface (continued)
Window Management
The Window Management page is shown below:
Use the buttons and menus shown above for the following settings:
o
Aspect Ratio (4:3, Scaled 4:3, 16:9, Centered 16:9 / Full Screen)
o
On-Screen Markers (Aspect Ratio and Safe Area Markers)
o
Center Marker
o
Marker Background
o
Curtain Color
Key & Image Enhancement
The Key & Image Enhancement page is shown below:
Use the buttons and menus shown above for the following settings:
o
Keypad Commands (Menu, Select, Up, Down, F1, F2, Power) – These commands simulate pressing keypad
buttons on a monitor. The entire on-screen menu can be navigated using this commands alone.
o
Color, Brightness and Contrast (Increment, Decrement, Default) – Use these commands to manually
increment or decrement the value of the corresponding control by 1 unit.
o
Brightness, Contrast and Color Value (0-100) – Use the SET command to assign a fixed value to the
corresponding control. Use the GET command to read the current value of a control
o
ColorTemp Setting – Set the color temperature preset