Minolta Color PageWorks 0990-7701-02 - Manual (Page 39)

26
Œ
CHAPTER 2
Usin
g th
e P
rin
te
r
4. Loading the Printing Paper
Loading Plain Paper / Recycled Paper
TRAY 1 (Multi Purpose Tray )
1
2
3
5
NOTE
- The paper should be loaded no higher than the Max.
Level Indicator.
2
PRECAUTIONS
⋅
Do not use the following paper. To do so will lead to reduced print quality, a misfeed or a failure.
- Paper already used in a thermal transfer printer or ink jet printer.
- Paper that is too thin (under 60 g/m 2 , 16 lbs.) or too thick (over 157 g/m 2 , 41-1/4 lbs.).
- Paper folded, curled or broken.
- Paper having binding holes or perforations.
- Paper of which surfaces are too smooth or too rough or which is very different in roughness between both surfaces.
- Paper whose surfaces have a special coating, such as carbon paper, heat-sensitive paper and pressure-sensitive paper.
- Sheets of paper varying in size.
- Paper not cut at right angles.
- Paper bound by gluing, stapling or clipping.
- Open the TRAY 1 (Multi Purpose Tray).
OK
NG
4
- Open the wrapper of the paper.
- Fan the paper stack thoroughly and align its edges.
- Adjust the Paper Guides to fit the size of the Paper.
- Load the paper stack on the tray facing up.
Paper Face
Face up
- To load a paper stack of long size, open the Paper
Support.
- When paper remains in the tray, do not load more
paper on the remaining paper.
- If you load the paper forcibly, it may cause a paper
misfeed.
- When you want to replenish the paper, take out the
remaining paper and stack it on the additional paper.
Then fan the paper and load it.
- We recommend replenishing the paper supply only
when the Tray is empty.
Paper Support