Minolta Color PageWorks 0990-7701-02 - Manual (Page 54)

41
CHAPTE
R
3
Chan
gin
g
t
h
e Prin
te
r
Set
tin
gs
PRINT MENU is a group of menu selections which is used frequently. It includes COPIES , PAPER
SIZE and ORIENTATION and so on.
1. COPIES
- The number of COPIES is selected. The setting goes through a loop from 1 to 999 and then back to 1 again. The default value is 1 .
- When the UP or DOWN key is pressed continuously, the setting is incremented/ decremented faster.
2. TRAY1 PAPER
- The paper size of the TRAY 1 (Multi Purpose Tray) is selected.
- The settings are A4, A5, Letter, Invoice, JIS-B5, Legal, Executive, COM 10, C5, DL, Monarch, and J-Post .
- European models have A4 as the default whereas U.S. and other North American models have Letter as the factory default.
3. MANUAL FEED
- The manual feed selection is Off or On . The factory default is Off .
- When the Proceed key is pressed while LOAD XXX IN MANUAL is shown, one page of a print job is printed using paper loaded in
the TRAY 1 (Multi Purpose Tray) .
- When the MANUAL FEED function is set to On , a print cycle can be initiated only by using the TRAY 1 (Multi Purpose Tray).
4. TRAY SWITCHING
- Enable or disable TRAY SWITCHING by selecting ON or OFF . The factory default is ON . If ON is selected, when either the TRAY 1
(Multi Purpose Tray), TRAY 2 (Second Cassette) or TRAY 3 (Third Cassette) runs out of paper during a printing cycle, the
printer will automatically switch to the other tray if it contains the same size and type of paper.
5. PAPER SOURCE
- The default TRAY is selected. The factory default is the Second Cassette (TRAY2) .
- The settings are TRAY 1 (Multi PurposeTray), TRAY 2 (Second Cassette) and TRAY 3 (Third Cassette) (when installed) .
6. PAPER SIZE
- The default paper size is selected. The factory default is A4 for Europe and Letter for North America.
- The settings are A4, A5, Letter, Invoice, JIS-B5, Legal, Executive, COM 10, C5, DL, Monarch, and J-post (Postcard) .
7. TRAY1 MEDIA
- The TRAY 1(Multi Purpose Tray) media type is selected. The factory default is PLAIN PAPER .
- The settings are PLAIN PAPER, TRANSPARENCY, THICK PAPER and ENVELOPE .
- When TRANSPARENCY and FULL COLOR (PRINT MODE ☞p. 43) are both selected, the engine slows the machine throughput to
one-third so that it can saturate the toner application.
- When THICK PAPER is selected, the engine slows the machine throughput to one-third so that it can saturate the toner application.
8. TRAY2 MEDIA
- The TRAY 2 (Second Cassette) media type is selected. The factory default media type is PLAIN PAPER .
- The settings are PLAIN PAPER and TRANSPARENCY .
- When TRANSPARENCY and FULL COLOR (PRINT MODE ☞p. 43) are both selected, the engine slows the machine throughput to
one-third so that it can saturate the toner application.
- When THICK PAPER is selected, the engine slows the machine throughput to one-third so that it can saturate the toner application.
3. Outline of the MENU Utilities
3. PRINT MENU