Minolta Color PageWorks 0990-7701-02 - Manual (Page 75)

62
Œ
M
a
in
tai
n
in
g Y
o
u
r
Pr
in
te
r
CHAPTER 4
Changing the Fusing Unit and Image Transfer Roller Unit
- Lift the Image Transfer Roller Unit to the position
shown.
4
2
NOTE
2
5
- Do not touch the surface of the Image Transfer
Roller.
It may lead to reduced print quality.
1
3 - Insert both shafts of the Image Transfer Roller Unit
into the bearings as shown.
- Pull out the Image Transfer Roller Unit.
- Take the new Image Transfer Roller Unit out of its
carton.
6
- Grasp and pull down the Front Cover Lock Release
Lever to swing open the Front Cover
Image Transfer Roller
Bearings
⋅
The Image Transfer Roller Unit and Fusing Unit can provide up to about 100,000 A4/ letter-size prints. (This value will vary with the
color-to-monochrome print ratio, image conditions, etc.)
⋅
Change the Fusing Unit and Image Transfer Roller Unit at the same time.
⋅
Put the old Fusing Unit and Image Transfer Roller Unit in polyethylene bags or the like and dispose of them according to your local
regulations, or return them to your sales representative.
1. Changing Cartridges
Front Cover
Lock Release
Lever
Transfer
Roller Unit