Minolta Color PageWorks 0990-7701-02 - Manual (Page 76)

63
Main
tainin
g Y
o
ur
Prin
ter
CHAPTER 4
7
CHAPTER 2
To Be Continued
- Install the Image Transfer Roller Unit.
9
- Push and hold the button of the Fusing Unit Lock
Release Lever and slide out the Fusing Unit.
11
13
NOTE
- The Fusing Unit is hot. Be careful not to touch the
area carrying the WARNING! HIGH
TEMPERATURE label.
- Before changing the Fusing Unit, wait until its surface
temperature falls and make sure that the temperature
is safe for replacement.
12
- PUSH DOWN ONLY ON THE GREEN SQUARES on
the top face of the Drum Cartridge.
- The Cartridge clicks into place when it is installed
correctly.
8
- Gently close the Front Cover.
Do not close it violently, because a printer breakdown
could result.
- You will hear the sound of the printer operating.
- Open the Rear Cover.
10
14
- Slide the Fusing Unit in the direction shown.
- Remove the Fusing Unit from its mount.
- Remove the installation screws (2 places) in the
Fusing Unit.
1. Changing Cartridges
WARNING!
HIGH TEMPER-
ATURE label