Ok 5, 66 œ, Changing the image transfer belt unit – Minolta Color PageWorks 0990-7701-02 User Manual

Page 79

Advertising
background image

66

Œ

M

a

in

tai

n

in

g Y

o

u

r

Pr

in

te

r

CHAPTER 4

Changing the Image Transfer Belt Unit.

The Image Transfer Belt Unit provides A4/letter-size prints of up to about 150,000 images. One image is equal to one cycle of Image

Transfer Belt Unit operation. The Image Transfer Belt Unit operates once (one image) to provide one monochrome print.
In comparison, the Image Transfer Belt Unit operates four times (four images) to provide one color print.

When 150,000 images are calculated in terms of color prints, about 37,500 sheets can be printed. (This value will vary according to

the color-to-monochrome print ratio, image conditions, etc.)

Put the old Image Transfer Belt Unit in a polyethylene bag or the like and dispose of it according to your local requirements or return

it to your sales representative.

6

1

4

- Grasp and pull down the Front Cover Lock Release

Lever to swing open the Front Cover

2

1

2

- Hold the grip and pull out the Drum Cartridge.

3

NOTE

2

- Do not touch the PC Drum Protection Shutter of the

Drum Cartridge. Also, never touch the internal PC
Drum. To do so will reduce print quality.

- If the Drum Cartridge is not to be immediately

installed in the printer, be sure to cover it with a cloth

to prevent light from striking it.

- Remove the Waste Bottle from the printer.

- Hold the grips and pull out the Image Transfer Belt

Unit.

NOTE

- Make sure that the Shutter at the toner exit of the

Image Transfer Belt Unit is closed securely. Leaving
the Shutter open will lead to internal contamination,

reduced print quality and/or a failure.

OK

5

PC Drum

NG

1. Changing Cartridges

Right side grip

Front Cover
Lock
Release
Lever

PC Drum
Protection
Shutter

Left side grip

Advertising