Multi-Tech Systems MVP103 - Manual (Page 13)

Chapter 2 - Configuration
Multi-Tech Systems, Inc. Avaya Communication Manager Guide 13
Note that, in page 2 of the Communication Manager “Station” form, the “Direct IP-IP Audio
Connection” field must be set to “y” and the “IP Audio Hairpinning” field must be set to “n.”
4e. Configure Security Code. This must match the security code configured in the Communication
Manager “Station” form (see first graphic in step 4d).
4f. Configure Primary Gatekeeper IP Address. This must be configured to match the IP address of the
CLAN or PROCR card in the “IP Node Names” form of the primary CM gatekeeper. Do not
change the RAS port from the default 1719 and leave the Gatekeeper Name field blank.
4g. Configure IP addresses for Alternate Gatekeeper 1 and Alternate Gatekeeper 2 (optional). These
must be configured to match the IP address of the respective CLAN or PROCR card in the PBX unit
serving as the Alternate Gatekeeper. This field appears in IP Node Names form of the
Communication Manager software for that PBX. If you are using the MultiVOIP Gatekeeper as an
alternate gatekeeper, enter the IP address of the MultiVOIP. The alternate MultiVOIP gatekeeper
must appear after any Communication Manager alternate gatekeepers.