Multi-Tech Systems MVP103 - Manual (Page 31)

Chapter 2 - Configuration
Multi-Tech Systems, Inc. Avaya Communication Manager Guide 31
“Regional Parameter” Definitions Continued
Field Name Values Description
Gain 2 gain in dB
+3dB to –31dB
and “mute” setting Amplification factor of higher frequency of pair.
This applies to the dial, ring, busy, and ‘unobtainable’ (fast
busy) tones that the MultiVOIP outputs as audio to the FXS,
FXO, or E&M port. Default: -16dB
Cadence
(msec)
On/Off n/n/n/n
four integer time values in
milli-seconds; zero value
for dial-tone indicates
continuous tone On/off pattern of tone durations used to denote phone ringing,
phone busy, connection unobtainable (fast busy), dial tone (“0”
indicates continuous tone), survivability, and re-order. Default
values differ for different countries/regions. Although most
cadences have only two parts (an “on” duration and an “off”
duration), some telephony cadences have four parts. Most
cadences, then, are expressed as two iterations of a two-part
sequence. Although this is redundant, it is necessary to allow
for expression of 4-part cadences.
Custom
(button) -- Click on the “Custom” button to bring up the Custom Tone
Pair Settings screen. (The “Custom” button is active only when
“Custom” is selected in the Country/Region field.) This screen
allows the user to specify tone pair attributes that are not found
in any of the standard national/regional telephony toning
schemes.
4. Set Custom Tones and Cadences (optional). . The Regional Parameters dialog box has a secondary
dialog box that allows you to customize DTMF tone pairs to create unique ring-tones, dial-tones, busy-
tones or “unobtainable” tones (fast busy signal) or “re-order” tones (telling the user that she must hang
up an off-hook phone) or “survivability” tones (an indication of call-routing redundancy in
Communication Manager systems only) for your system. Regional Parameters can only be adjusted to
change tones played on FXS or FXO ports. Tones for IP phones are fixed and cannot be changed.
This screen allows the user to specify tone-pair attributes that are not found in any of the standard
national/regional telephony toning schemes. To access this customization feature, click on the Custom
button on the Regional Parameters screen. (The “Custom” button is active only when “Custom” is
selected in the Country/Region field.)