Multi-Tech Systems MVP103 - Manual (Page 9)

Chapter 2 - Configuration
Multi-Tech Systems, Inc. Avaya Communication Manager Guide 9
using a non-Avaya analog telephone. This station must be properly administered in the Audix
Voice Mail System for the message waiting feature to work.
2d. Activate the “Caller ID” feature if you have FXS Interface selected and are using an analog
telephone with caller ID display. The MultiVOIP will output Caller ID information, if received,
between the first and second rings.
2e. Activate “Caller ID” on FXO interfaces if the attached line supports it. The MultiVOIP will capture
the Caller ID information, if provided, between the first and second rings and will forward the
information to CM.
Note: If the CM customer is operating on CM release 2.0.1 (or newer), remember that for the ‘h323’
specified station, the following CM admin fields must be set appropriately:
a) The ‘Message Waiting’ field must be enabled and set to “led” if this feature is intended to be
supported on the MultiVOIPs analog station port.
b) Similarly, the following features must be enabled as desired:
• Switchhook flash
• Call Waiting Indication
• Attendant Call Waiting Indication