Multi-Tech Systems MVP103 - Manual (Page 68)

Chapter 4 – Miscellaneous
68 Multi-Tech Systems, Inc. Avaya Communication Manager Guide
In the Dial String box, enter the AT command for dialing (atdt) plus the phone number of the remote
MultiVOIP.
Click OK when you are satisfied with your selections.
7. Run the MultiVOIP Configuration program. Click Start|Programs| MultiVOIP 9.06.XX Configuration.
8. The Dialing dialog box displays while software is dialing the remote MultiVOIP.
9. The Reading Setup dialog box displays.
10. The MultiVOIP main menu displays. This is the main menu of the remote MultiVOIP.
11. Change the configuration of the remote MultiVOIP and then click Save and Reboot to update the
configuration. The remote MultiVOIP will be brought down, the new configuration written to the unit,
and the unit will reboot.
12. Close the configuration program when the downloading is complete.
13. If the same telephone number is not going to be used again in the immediate future, you may want to
remove it from the Port Setup dialog box.