Microtek MKT-1300a - Manual (Page 18)

Loading the Batteries
Use two AA-sized Alkaline batteries
(supplied), or two AA-sized Nickel
Metal Hydride (NiMH) batteries as
the power source for the camera.
1.Make sure that the camera is
turned off; then push the battery
cover in the direction of the
arrow to open the cover.
2.Insert two AA-sized batteries
into the compartment.
Ensure that the plus (+) and
minus (–) polarity of the
batteries matches the polarity
markings in the battery
compartment.
3.Hold the batteries in place and
close the battery cover
securely.
To remove the batteries, open the
battery cover and take the batteries
out.
NOTE:
• Do not mix old batteries with new
ones.
• Do not mix different types of
batteries or batteries from
different manufacturers.
• Remove batteries and store them
when not using the camera to
prevent the batteries from leaking
and damaging the camera.
See the Appendix “Using the
Batteries” for details concerning the
use of batteries to power the
camera.