Microtek MKT-1300a - Manual (Page 24)

%
LCD Screen On/Off
The LCD screen with camera status
is automatically activated when the
camera is turned on. Use the LCD
screen to frame your shots, as well
as to view images and recorded
video in playback mode.
In any of the camera's operation
mode, press the DISP button to turn
the LCD screen on and off. The
LCD screen displays the status and
settings relevant to the mode you
are in.
1.In any mode, press the DISP
button to turn off the camera
status.
2.Press the DISP button again to
turn off the LCD screen.
DISP
Before Shooting
Using the Mode Switch
The Mode switch allows you to
switch among between Playback,
Photo, and Movie/Audio modes of
operation.
•
Playback Mode (p.32)
Displays the last photo, movie, or
audio taken. Allows you to
browse and delete images, movie
clips, and audio.
• Photo Mode (p.20)
Normal shooting mode using
automatic exposure, and
providing a full selection of
manual controls.
• / Movie/Audio Mode (p.31/
39)
Allows you to record movie and
audio clips of unlimited length
(limited only by the size of the
available memory).
LCD screen
with camera
status
LCD screen
off
LCD screen
without
camera status