F: warning and error messages, Appendix f – warning and error messages – Microtek MKT-1300a User Manual

Page 70

Advertising
background image

$!

Appendix F – Warning and Error Messages

The following table describes the LCD warning and error messages that are produced by the camera. Follow the

solution to eliminate the problem indicated by the message.

Display

Problem

Solution

(Blinking)

Batteries are exhausted.

Turn the camera off and replace or

recharge batteries.

BATTERY LOW!

Battery power is depleted;

Replace or recharge batteries.

camera will shut off soon.

CARD ERROR!

• The SD card contact area

• Use a cotton swab dipped in with

is smudged.

industrial alcohol to clean the contacts.

• The SD card is damaged.

• Replace the SD card.

• Incorrectly formatted SD card.

• Reformat or replace the SD card.

• Camera is faulty.

• Contact Microtek Customer Service.

MEMORY FULL!

The memory space is fully recorded. Erase some data or use an SD card that

has ample free space.

IMAGE CANNOT BE DELETED!

The SD card is write-protected.

Set the write-protected tab on the SD card

to the "unlocked" position.

Advertising