Microtek MKT-1300a - Manual (Page 44)

!%
Television Viewing
This feature enables you to view
your camera’s movies and images
on a TV monitor instead of the LCD
screen.
To view the camera’s images and
movies on a TV, you must first
select the video output system.
To select the video output system:
1.Set the Mode switch to any
operation mode.
2.Press the MENU button.
3.Use the 4-way arrow buttons to
enter Setup menu mode ( ).
4.Use the 4-way arrow buttons to
select “VIDEO”, then select
“NTSC” or “PAL”.
To view images on a TV set:
1.Make sure the TV set is turned
off.
2.Connect the camera to your TV
set, using the provided Video
cable.
• Connect one
end of the
Video cable
to the
camera’s TV-
output
connector.
• Connect the
other end of
the cable to
the Video In
jack of the
TV set.
3.Turn on the TV set and switch it
to run off Video Input.
4.Set the camera’s Mode switch
to (Playback).
The most recently recorded
image appears on the TV
monitor.
NTSC: For USA, Canada,
Mexico, Taiwan, Korea, Japan,
etc.
PAL: For Europe, Australia,
China, Singapore, etc.
5.Press the MENU button to
confirm the setting and exit the
menu.