Microtek MKT-1300a - Manual (Page 49)

"
Setting the Time
TIME enables you to change the
time setting in your camera.
1.Enter Setup menu mode.
2.Use the 4-way arrow buttons to
select “TIME”.
3.Use the / arrow buttons to
toggle between the “hr”, “mm”,
and “sec” settings.
4.Use the / arrow buttons to
change setting.
5.Press the Shutter (OK) button
once you have finalized the time
settings.
6.Press the MENU button to
confirm the settings and exit the
Setup menu.
Setting the Date
DATE enables you to change the
calendar setting in your camera.
1.Enter Setup menu mode.
2.Use the 4-way arrow buttons to
select “DATE”.
3.Use the / arrow buttons to
toggle between the “yyyy”,
“mm”, and “dd” settings.
4.Use the / arrow buttons to
change setting.
5.Press the Shutter (OK) button
once you have finalized the date
settings.
6.Press the MENU button to
confirm the settings and exit the
Setup menu.
Beep Adjustment
BEEP determines whether a “beep”
signal is heard when you
successfully perform an operation
with the camera.
1.Enter Setup menu mode.
2.Use the 4-way arrow buttons to
select “BEEP”.
3.Use the / arrow buttons to
toggle between “ON” and
“OFF”.
Select “ON” to enable the beep
signal. Select “OFF” to disable
the beep.
4.Press the MENU button to
confirm the setting and exit the
Setup menu.