Microtek MKT-1300a - Manual (Page 22)

#
Setting the Date and
Time
DATE/TIME enables you to set the
date and change the clock setting.
You should set the date and time
when you use the camera for the
first time. Follow these instructions:
1.Set the Mode switch to any
operation mode.
2.Press the MENU button.
3.Use the / arrow buttons to
enter Setup menu mode ( ) .
4.Use the / arrow buttons to
select “DATE” or “TIME”.
5.Use the / arrow buttons to
toggle between the “yyyy”,
“mm”, and “dd” formats for the
date, or “hr”, “min” and “sec”
formats for the time.
6.Use the / arrow buttons to
adjust the value.
7.Press the Shutter (OK) button
once you have finalized the date
and time settings.
8.Press the MENU button to
confirm the settings and exit the
menu.
Selecting the Language
The camera allows you to select
the LCD screen display language.
1.Set the Mode switch to any
operation mode.
2.Press the MENU button.
3.Use the / arrow buttons to
enter Setup menu mode ( ).
4.Use the 4-way arrow buttons to
select “LANGUAGE”, then
select the language you want to
use.
5.Press the MENU button to
confirm the setting and exit the
menu.
You can press the MENU button
again to check the language status.