Section 1 introduction, 0 scope 1-1, Introduction – MGE UPS Systems 3.5 to 21 kVA N+1 User Manual
Page 13: Scope -1
WARNING:
An AC output will be present at the output terminals immedi-
ately when AC input is energized.
ATTENTION:
La tension alternative de sortie appara ît dès la mise sous ten-
sion de l'entrée.
WARNUNG!
Eine Ausgangsspannung liegt an den Ausgangsklemmen,
sobald der Netzeingang angeschlossen wird.
1.0
Scope
This manual provides technical information for installation, operation, and maintenance of MGE inverter systems
series ranging from 3.5 kVA to 21 kVA. Please read this manual thoroughly before installing and operating the sys-
tem. Please retain this manual for future reference.
The manual is divided into three sections:
Section 1 Introduction
This section introduces the 3.5 to 21 kVA static inverters, including a general description of the invert-
er, its components, and specifications.
Section 2 Installation & Operation
This section describes installation of the inverters, including receiving, handling, and storage proce-
dures; prerequisites to the installation; installation procedures; and start-up procedures.
Section 3 Maintenance
This section describes the maintenance and service of the S4 Inverter, including safety instructions,
preventive maintenance, descriptions of replacement kits, and a troubleshooting table.
Owner’s Manual
Introduction
I n t r o d u c t i o n
page 1 — 1