Miele H 4050 BM - Manual (Page 30)

Using the residual heat, Energy-save function
Shortly before the end of a programme using a traditional function the heating
elements will be switched off automatically.
The residual heat is sufficient to finish cooking.
Using the residual heat in the oven saves energy.
"Energy save phase" will appear in the display to show that the oven is in energy
save mode. The actual temperature is no longer visible.
The cooling fan continues to run, as does the hot air fan if a "fan" setting had been
chosen.
To check and change an entered time
It is possible to check or change times entered for a cooking programme at any
time by calling up the relevant function.
To delete a set time
^ Press the ON/OFF switch
If there is a power cut, all data entered will be deleted.
Programming cooking times
30