Roasting, After the roasting process is finished, Useful hints – Miele H 4050 BM User Manual

Page 57

Advertising
background image

Microwave + Auto roast

Slide the glass tray with the rack into
the first runner level from the bottom.

Use only heat resistant pots, with no
metal in the pot or lid. Microwaves
cannot penetrate metal to reach the
food in the pot.

If using roasting foil

– cut the foil approx. 40 cm longer than

the piece of food

– and tie carefully. Make sure the pot,

foil and ties are suitable for
microwave use.

After selecting an Auto roast
temperature, select a microwave setting
for the total cooking time of:

– 300 W for roasting meat or fish,

– 150 W for roasting poultry.

After the roasting process is
finished

Take the roast out of the oven, wrap in
aluminium foil and leave to stand for
about 10 minutes. This helps retain the
juices when the meat is carved.

Useful hints

Roasting in a covered pot

Season the meat and place in the pot.
Add some knobs of butter or margarine
or baste with a little oil or cooking fat.
Add about 1/8 litre of water when
roasting a big lean joint of meat (2-3 kg)
or roasting poultry with a high fat
content.

Browning only occurs towards the end
of the roasting time. 15 - 20 minutes
before the end of roasting time take the
lid off the pot.

Roasting on the rack

Add a little fat or oil to very lean meat or
place a few strips of streaky bacon on
the top.

Do not add too much liquid to the tray
during cooking as this will hinder the
browning process.
Please note that open roasting can give
rise to excessive smoke.

The temperature required can be set
20°C lower than for pot roasting.

Roasting poultry

For a crisp finish, baste the poultry ten
minutes before the end of cooking time
with slightly salted water.

Frozen meat

Deep frozen meat should be thoroughly
defrosted before roasting.

Roasting

57

Advertising
This manual is related to the following products: