Miele H 4050 BM - Manual (Page 38)

Safety
This menu option has three
sub-options: System lock, In use and
Solo programme.
System lock:
You can prevent the appliance from
being used. You can change from the
default setting "Off" to "On". A lock
symbol will then be visible in the middle
of the bottom line of the display. The
lock symbol will be open when the
system is unlocked and closed when
the system is locked. If you then select
the lock, you can open or close it or
select the SOLO function. SOLO
means that only one programme can
be started and this must be started im-
mediately. All other programmes are
locked. However, you can still use the
minute minder.
The system lock will remain selected
even after a power cut.
In use:
It is also possible to lock the appliance
when it is in use so that settings cannot
be altered during the programme. You
can change the factory default setting
from "Off" to "On". A lock symbol will
then appear in the middle of the bottom
line of the display.
SOLO programme:
You can select one of the programmes
from all the functions and user
programmes which you can start even
when the appliance is locked. A lock
symbol and "SOLO" will then be visible
in the bottom line of the display.
Units
You can alter the units, namely the
weight from kg to lbs and the
temperature from °C to °F.
Showroom
This setting is for dealers who want to
demonstrate the appliance without the
heater elements working. Do not
activate this setting for domestic use!
Factory default
You can delete your own personal
settings and alterations and reinstate
the standard factory settings.
You can either reinstate all the settings
at once or you can select individual
settings. For example, you can delete
only your user programmes, reinstate
the content and order of the original
main menu, and re-set the
recommended values for temperatures
and MW power levels.
Settings
38