Miele H 4050 BM - Manual (Page 76)

Before your appliance can be used with
Miele|home you need to install a
Miele|home communication module.
Installing and logging onto
Miele
{ home
^ Disconnect the appliance from the
mains electricity supply.
^ Unscrew the screws used for
securing the appliance into the sides
of the housing unit.
^ Pull the appliance out of the housing
unit until the shaft, in which the
Miele|home communication module
is fitted, is accessible.
^ Insert the Miele|home
communication module.
^ Push the appliance back into the
housing unit and secure it.
^ Reconnect the appliance to the
mains electricity supply.
After a period of about 60 seconds you
will be able to sign on to the
Miele|home system.
Instructions on how to do this are
given in the separate instructions
supplied with the Miele|home
system.
^ Switch on the Miele|home system.
^ Switch the appliance on and call up
the "Settings J" menu.
"Miele|home" will now appear as an
option.
^ Confirm this option to sign on.
The signing on procedure will then
commence. It can be followed in the
display. It will take a few minutes. As
soon as it has finished the message
"Sign on successful" will appear in the
display.
Once you are successfully signed on
you can use the Miele|home system to
call up information regarding your
appliance, e. g. you can find out how a
programmed cooking process is
progressing.
An acoustic signal on your Miele|home
system will let you know when, for
instance, a programme has finished or
when something needs to be done in
an automatic programme such as
adding water or ingredients.
If the sign on procedure does not
work first time you should try again.
If this does not solve the problem,
call the Miele Service Department.
Signing off Miele { home
^ Follow the same procedure you used
for signing on.
Miele
{
home
76